Items where Subject is "Engineering"

B

Bacquian, Bryan Christian S. and Gomez, Frederick Ray I. (2020) A Comprehensive Study for Specialized Silicon-on-Insulator Wafers. Journal of Engineering Research and Reports, 10 (2). pp. 51-57. ISSN 2582-2926

Barceló, Veronica (2017) A Scientific Legacy: Theory of Dynamic Interactions. World Journal of Mechanics, 07 (03). pp. 85-100. ISSN 2160-049X

Bian, Ningkang and Guo, Pengyan and Xing, Hao and Yin, Wanxiang and Wei, Jiabao and Peng, Jiale (2024) Research Status of Laser Welding Technology for Thin Metal Plates. Journal of Engineering Research and Reports, 26 (10). pp. 228-238. ISSN 2582-2926

C

Cano, Julio (2017) Rotational Dynamics: An Exciting Challenge. World Journal of Mechanics, 07 (03). pp. 68-84. ISSN 2160-049X

Chima, Osuagwu Andrew and Ifeanyichukwu, Nkeleme Emmanuel and Nnamdi, Amafili Tochukwu and Chukwuemeka, Ike Goodluck and Precious-favour, Nzeneri Oluchukwu (2021) Evaluation of the Practice of Building Survey for Maintenance of Public Building in South-East Nigeria. Journal of Engineering Research and Reports, 20 (3). pp. 108-122. ISSN 2582-2926

Cárcel-Carrasco, Javier and Cárcel-Carrasco, José-Antonio (2021) Analysis for the Knowledge Management Application in Maintenance Engineering: Perception from Maintenance Technicians. Applied Sciences, 11 (2). p. 703. ISSN 2076-3417

D

Ding, Nan (2024) Research Progress on Frost Durability of Rubber Recycled Concrete. Journal of Engineering Research and Reports, 26 (7). pp. 17-25. ISSN 2582-2926

F

Fu, Jingcheng and van Heerden, Albert S. J. and Judt, David and Lawson, Craig (2022) A Generic Mission-Level Flight Control Surface EMA Power Consumption Simulation Tool. Aerospace, 9 (6). p. 290. ISSN 2226-4310

G

Gean, Vitor Salmoria and Janaina, Lise Leite and Rodrigo, Acacio Paggi (2017) Graded PA6/PA12 blends prepared by selective laser sintering. Journal of Engineering and Technology Research, 9 (3). pp. 23-29. ISSN 2006-9790

Gheidan, Abdelgader A.S. and Wahid, Mazlan Bin Abdul and Chukwunonso, Opia Anthony (2024) Empirical Research on Sustainability in Mitigating Fuel Emissions and Enhancing Load Performance of Internal Combustion Engines. In: Current Approaches in Engineering Research and Technology Vol. 3. B P International, pp. 19-34. ISBN 978-81-973454-0-1

Gholami-Khesht, Hosein and Davari, Pooya and Blaabjerg, Frede (2021) An Adaptive Model Predictive Voltage Control for LC-Filtered Voltage Source Inverters. Applied Sciences, 11 (2). p. 704. ISSN 2076-3417

Gomez, Frederick Ray I. and Gablan, Alyssa Grace S. and Moreno, Anthony R. and Gomez, Nerie R. (2021) Augmented Leadframe Design for Stable Multi-Wire Ground Bonding. Journal of Engineering Research and Reports, 20 (3). pp. 1-5. ISSN 2582-2926

Graycochea Jr., Edwin M. and Gomez, Frederick Ray I. and Rodriguez, Rennier S. (2020) Warpage Mitigation through Diebond Process Improvement with Enhanced Leadframe Configuration. Journal of Engineering Research and Reports, 10 (2). pp. 39-42. ISSN 2582-2926

H

Harouna, Gado Ibrahim and Oumar, Sanogo and Salifou, Koucka Ouiminga and Tizane, Daho and Jean, Koulidiati (2018) Impact of pre-treatment by torrefaction and carbonization on temperature field, energy efficiency and tar content during the gasification of cotton stalks. Journal of Engineering and Technology Research, 10 (2). pp. 7-18. ISSN 2006-9790

I

Ibrahim, Ismaila (2024) Evaluation of Flow Assurance and Hydrate Control in Subsea Natural Gas Production. In: Current Approaches in Engineering Research and Technology Vol. 3. B P International, pp. 35-51. ISBN 978-81-973454-0-1

Iloabachie, I. C. C. and Atuanya, C. U. and Ogbu, C. C. (2023) Optimization Analysis of Hardness Test for Powdered Pentaclethra macrophylla Pod /Bio-Epoxy Resin Based Brake Pad Composite Using Central Composite Design. Journal of Engineering Research and Reports, 24 (12). pp. 19-28. ISSN 2582-2926

Islam, Riadul and Chakraborty, Debashon and Roy, Anup Kumar and Rahman, Md Mostafizur and Enam, Md Mahfuzur Rahman (2024) Effectiveness of AI-based Machine Learning Algorithms in Predicting Global Market Movements. Journal of Engineering Research and Reports, 26 (8). pp. 343-354. ISSN 2582-2926

J

Jauregui-Correa, Juan Carlos and Morales-Velazquez, Luis and Otremba, Frank and Hurtado-Hurtado, Gerardo (2022) Method for predicting dynamic loads for a health monitoring system for subway tracks. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Jr., Edwin M. Graycochea and Manalo, Endalicio D. and Rodriguez, Rennier S. and Gomez, Frederick Ray I. (2021) Glue Voids Reduction on QFN Device through Material and Process Improvement. Journal of Engineering Research and Reports, 20 (3). pp. 15-19. ISSN 2582-2926

L

Li, Qiang and Pohrt, Roman and Popov, Valentin L. (2019) Adhesive Strength of Contacts of Rough Spheres. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Li, Xinli and Li, Yansong and Hu, Dayong and Rao, Wei and Qi, Yufeng and Yang, Qiang and Wang, Gang (2022) Trim Flap System Design for Improving Ballistic-Lifting Entry Performance of the Tianwen-1 Mars Probe. Aerospace, 9 (6). p. 287. ISSN 2226-4310

Linping, Yue and Feng, Jiang and Hong, Jiang and Wei, Jiang and Zhiyong, Wang and Zheng, Zhou and Jianping, Xiong and Tian, Wu (2022) Dynamic responses of 500-kV transmission line towers under impact force of rockfall in a mountainous area. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

M

Madheswaran, M. and Sreedhar, Kumar S. (2017) An improved frequency based agglomerative clustering algorithm for detecting distinct clusters on two dimensional dataset. Journal of Engineering and Technology Research, 9 (4). pp. 30-41. ISSN 2006-9790

Mahmoudi, Shayan and Rezvani, Ali and Niknam, Mehdi (2020) A Comparative Study on the Developmental Trends in the Contemporary Iranian Architecture; Case Study-Khosrawi Leather Factory of Tabriz. Journal of Engineering Research and Reports, 10 (2). pp. 1-18. ISSN 2582-2926

Mala, Wrya O. (2024) Adsorption of Humic Acid from Water Using Metal-Organic Frameworks (MOFs): An Effective Removal Strategy. Journal of Engineering Research and Reports, 26 (7). pp. 121-149. ISSN 2582-2926

Martín, Almudena (2017) The Flight of the Boomerang Comments. World Journal of Mechanics, 07 (03). pp. 46-67. ISSN 2160-049X

Merino, Justo (2017) The Works and Days of Gabriel Barceló. World Journal of Mechanics, 07 (03). pp. 43-45. ISSN 2160-049X

N

Nakano, Ken and Kawaguchi, Kai and Takeshima, Kazuho and Shiraishi, Yu and Forsbach, Fabian and Benad, Justus and Popov, Mikhail and Popov, Valentin L. (2019) Investigation on Dynamic Response of Rubber in Frictional Contact. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

O

Odinikuku, William E. and Atadious, David and P. Onwuamaeze, Ikechukwu (2020) Optimization of Mild Steel Welding Process Parameters Using Multivariate Linear Regression. Journal of Engineering Research and Reports, 10 (2). pp. 43-50. ISSN 2582-2926

Okuroghoboye, Diepreye Itugha and Emmanuel, Munakurogha Adigio (2017) Determination of dispersivity in the subsurface foreshores of River Mersey Outer Estuary. Journal of Engineering and Technology Research, 9 (2). pp. 14-22. ISSN 2006-9790

Olaby, Osama and Dutta, Saikat and Harrison, Tim and Ward, Christopher P. and Dixon, Roger (2021) Realisation of a Novel Functionally Redundant Actuation System for a Railway Track-Switch. Applied Sciences, 11 (2). p. 702. ISSN 2076-3417

Orgeira-Crespo, Pedro and Rey, Guillermo and Ulloa, Carlos and Garcia-Luis, Uxia and Rouco, Pablo and Aguado-Agelet, Fernando (2022) Optimization of the Conceptual Design of a Multistage Rocket Launcher. Aerospace, 9 (6). p. 286. ISSN 2226-4310

P

Paul, Niloy Kanti and Saha, Dipanwita and Biswas, Kaushik and Akter, Samia and Islam, Rifat Tasnia and Bhuyan, Muhibul Haque (2023) Smart Trash Collection System – An IoT and Microcontroller-Based Scheme. Journal of Engineering Research and Reports, 24 (11). pp. 1-13. ISSN 2582-2926

Q

Quill, Rachael and Sharples, Jason J. and Wagenbrenner, Natalie S. and Sidhu, Leesa A. and Forthofer, Jason M. (2019) Modeling Wind Direction Distributions Using a Diagnostic Model in the Context of Probabilistic Fire Spread Prediction. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

R

Ray I. Gomez, Frederick and S. Rodriguez, Rennier (2020) Modified Sidewall Design of QFN Package. Journal of Engineering Research and Reports, 10 (2). pp. 19-23. ISSN 2582-2926

S

Sadighi, Sina and Afshar, Hossein and Jabbari, Mohsen and Ahmadi Danesh Ashtiani, Hossein (2022) An analytical approach to entropy production in MHD mixed convection micropolar fluid flow over an inclined porous stretching sheet. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Shrikant, Pawar and Harshul, Batra (2018) Online electronic laboratory notebook: A secured cloud storage system scripted in Hypertext Pre-processor (PHP) programming language. Journal of Engineering and Technology Research, 10 (1). pp. 1-6. ISSN 2006-9790

T

Talledo, Jefferson (2021) Modeling of Leadframe Strip Warpage after Die Attach Cure Process. Journal of Engineering Research and Reports, 20 (3). pp. 50-56. ISSN 2582-2926

Talledo, Jefferson (2021) Understanding Package Crack Signatures in a Leadframe Semiconductor Package. Journal of Engineering Research and Reports, 20 (3). pp. 6-14. ISSN 2582-2926

Y

Yang, Kai and Yang, Hongyu and Zhang, Jianwei and Kang, Rui (2022) Effects on Taxiing Conflicts at Intersections by Pilots’ Sensitive Speed Adjustment. Aerospace, 9 (6). p. 288. ISSN 2226-4310

Young, Linda and Nienhuis, Emily T. and Koulentianos, Dimitris and Doumy, Gilles and March, Anne Marie and Southworth, Stephen H. and Clark, Sue B. and Orlando, Thomas M. and LaVerne, Jay A. and Pearce, Carolyn I. (2021) Photon-In/Photon-Out X-ray Free-Electron Laser Studies of Radiolysis. Applied Sciences, 11 (2). p. 701. ISSN 2076-3417

Z

Zou, Jie and Li, Dongxu and Wang, Jie and Yu, Ye (2022) Experimental Study of Measuring the Wrinkle of Solar Sails. Aerospace, 9 (6). p. 289. ISSN 2226-4310

Á

Álvarez, Alejandro (2017) Theory of Dynamic Interactions: Innovations. World Journal of Mechanics, 07 (03). pp. 101-119. ISSN 2160-049X

Ž

Žvanut, Pavel and Turk, Goran and Kryžanowski, Andrej (2021) Thermal Analysis of a Concrete Dam Taking into Account Insolation, Shading, Water Level and Spillover. Applied Sciences, 11 (2). p. 705. ISSN 2076-3417